YW55 Hydraulic Upset Press for Drill Pipe

1.Pressure:500~1250 ton 2.used for tubing pipe,drill pipe,sucker rod and pipe fittings upsetting 3.Meet API &CE standard

  

YW55 Hydraulic Upset Press for Drill Pipe 

Application:

Oil drill pipe end upsetting machine is applied in the upsetting processing of drill or oil pipe. To  ensure the stregth at the  section and  welding surface in the course of car silk processing.

Types:

There are three types of  processing: outer upsetting, inner upsetting and outer-inner upsetting.  

Operating types:

Adjusting ,mannual or automatic are available in this machine 

Main technical parameters:

1.Suitable pipe: Drill E75,X95,G105,S135

2.Specifications range: based on customers' requirements

3.Steel pipe length: based on customers' requirements

4.Production speed: less than 40s/p for oil pipe 60-90s/p for drill pipe according to the processing requirements.

5.The daily work class: 3 class (24 hours)

6.Equirement utilization: 85%

7.Power: Voltage into line 380V

8.Total capacity:1000KW

9.Height above the ground: 6000mm

Parameters: 

Item			500/250	600/300	800/400
Mold clamping cylinder nominal force			5000KN	6000KN	8000KN
Mold clamping cylinder return force			930KN	600KN	800KN
Mold clamping cylinder speed	idle		200mm/s	250~300mm/s	250~300mm/s
	working		50mm/s	50mm/s	50mm/s
	return		200mm/s	150mm/s	150mm/s
Mold clamping cylinder stroke			500mm	500mm	500mm
Level pier cylinder  nominal force			2500KN	3000KN	8000KN
Level pier cylinder  return force			600KN	1100KN	1100KN
Level pier cylinder speed		FF	100mm/s	100mm/s	100mm/s
		working	50~100mm/s	60mm/s	60mm/s
		return	200mm/s	165mm/s	165mm/s
Level pier cylinder stroke			800mm	800mm	800mm
Working table size		LR	600mm	740mm	780mm
		FB	1200mm	1400mm	1500mm
Production speed			90 p/h	90 p/h	90 p/h

According to the customers' requirements , the automatic feeding and unloading function could be designed and installed

the machine could spread the cooling water and air automaticly .